This ENG set offers a great amount of flexibility for portable recording indoors or outdoors. Its SKP 100 G3 plug-on transmitter transforms XLR equipped devices (such as microphones and mixing consoles) into wireless devices by simply plugging the unit in. The bodypack transmitter, as well as the plug on, can by synced up to the receiver with the simple push of a button. A very small high-quality directional clip-on microphone completes this set.
| Transmission/receiving frequencies | 1680 |
|
Presets | 12 |
|
Switching bandwidth | 42 MHz |
|
Peak deviation | +/- 48 kHz |
|
Compander | HDX |
|
Frequency response (microphone) | 80 - 18000 Hz |
|
Signal-to-noise ratio | > 110 dB(A) |
|
THD, total harmonic distortion | < 0,9 % |
|
In compliance with | ETS 300422 , ETS 300445 , CE , FCC |
|
Audio-XLR connector | 3,5 mmjack |
|
Audio output level (unbalanced) | +10 dBu max |
|
Dimensions (Receiver) | 82 x 64 x 24 mm |
|
Weight (Receiver) | ~ 160 g |
|
RF output power | 30 mW |
|
Operating time (transmitter) | > 8 h |
|
Input voltage range | Mic/Line, 1,8V/3,0V (SK100G2), Mic, 1,2V (SKP100G2) |
|
Dimensions (Transmitter) | 82 x 64 x 24 mm (SK100 G2), 105x43x43mm (SKP100G2) |
|
Weight (Transmitter) | ~ 160 g (SK100G2), 195g (SKP100G2) |
|
Transducer; Microphone type | elektret |
|
AF sensitivity | 20 mV/Pa |
|
Sound pressure level (SPL) | 130 dB(SPL) max. |
|
Pick-up pattern | omni- directional |
